Contracts Specialist can help resolve your building problems and other construction issues.
Generally, building problems are unavoidable, but we can lessen the potential costs that may come up because of it. At the start of a construction project, every aspect of the construction seems to be on the right track. The building and construction process goes well, but suddenly building problems may come up and derail your well-laid plans.
Even with the best intentions and preparation, we cannot always foresee exactly where and when building disputes and issues arise. Building problems have many common forms and presents itself in building design, planning, supervision, inspection, and legal requirements.
With the current growth and positive outlook of the Australia’s construction sector, many homeowners, contractors, investors, and builders have been occupied with construction works. Fortunately, this booming trend is projected to continue.
Consulting with a specialist construction lawyer from Contracts Specialist early on would be the best step for you to avoid or efficiently manage building problems and disputes.
Design errors are considered as part of defective construction works that will cost a lot of money on the owner’s or builder’s side. Building designs include the layout, water control, insulation and vapour barriers, floors and walls, and systems among others.
Well-established buildings need continuous and efficient maintenance of its structure. Building maintenance includes the routine and preventive ways to keep the buildings, utilities, and ground in good and safe condition.
A building with defects has unfunctional parts that can cause dangerous conditions for individuals occupying it. The main reasons for these defective works are poor workmanship and the use of defective or incorrect construction materials.
Generally, concrete spalling or concrete scaling, can be seen in a concrete slab or a layer of concrete. This happens in certain areas experiencing colder climates and continuous destructive natural forces such as cyclic freezing and thawing. Concrete scaling can be described as parts of a building with cracks, visible broken tiles, surface bulges and huge parts of concrete are peeling off.
Signs of non-structural cracks are superficial or cosmetic cracks found on the plaster or mortar renderings of buildings. The measure of the cracks can range from 1 to 2 mm wide which is comparable to thin hairline cracks.
Building cracks often occur due to elastic deformation, thermal movement, moisture changes, chemical reaction, and other related factors.
Defective external wall finishes can be identified with cracking of wall surface, bulging with a hollow base, falling off tiles or bricks, and debonding of finishes. In addition, this defect usually causes hollow sound if tapped using a hammer.
Structural defects are generally specified with cracks. Unlike in non-structural types of building cracks, structural cracks are extensive as it affects the foundation walls, beams, and columns or slabs.
A building’s structure is essential. So, these defects can be dangerous and unsafe due to possible partial or complete collapse of the whole building.
Common causes of water seepage include leakages in the drainage pipe and water supply pipes; deteriorated waterproofing of floor slabs or bath-tub seals; and seepage of wastewater or rainwater through the roof.
Water seepage can be easily repaired through a building technician or licensed plumber.
A building inspection is necessary to check for building defects and determine the current condition of a property. This process is significant because it can possibly save owners or builders from expensive further renovations.
Inspecting a building usually happens if one is buying a unit, apartment, townhouses, and building investments.
Among others, a building inspection would include identifying:
Home warranty insurance is a policy for residential building work that covers an individual for the types of loss, and for the amounts of loss within a construction project. This act covers the loss or damage resulting from non-completion of the work due to insolvency, death or disappearance of the builder; and loss or damages due to a breach of a statutory warranty.
Building control is the only answer to prevent building problems. It is a system to be applied in a building to manage the operation. A building control system includes a simple thermostat, fire system, lighting, security, and HVAC equipment.
It is also suggested to hire or consult a construction lawyer early in a construction process to guide you through all the legal stages of construction. Building problems can eventually lead to building disputes between the owner and the other parties affiliated within a construction project.
With the given instance, the vital role of a building and construction lawyer is a must. They can help when it comes to building disputes in contracts, building personnel disagreements, finance, warranties, liability claims, licensing, and liens.
Contracts Specialist is a Sydney-based construction law firm that deals with Building Disputes, Construction Contracts, Debt Recovery, and Security of Payment. With Contracts Specialist, you are ensured that you are in good hands.